English Cottage Style Home In The Making: Copper Gutter System Shines: Part 5 In A Series

| Comments (2)

Seamless copper gutters were the latest addition to this English cottage style home on a recent visit to The Retreat. Rhett Bonner, builder, gave the highlights of the components of the copper gutter system. Basically, they have installed half-round seamless copper gutters with hand-cast copper hangers, downspout bands and brackets; a very rare find in the gutter business. The entire copper gutter system should last the life of the home, with proper upkeep, and will turn a beautiful verdigris patina over time. The hand-cast copper brackets are attached to the open cornice overhangs in old world craftsmanship style. A little research tells me that the gutters themselves will set you back about $13 - $18 per lineal foot installed, not including the hardware to hang them.


Take A Closer Look At These Copper Gutter System Photos

You owe it to yourself to click on each one of these photos to truly appreciate the beauty of utilizing copper for gutters.They''ll last the life of the home because copper doesn't rust. It will only look better over time with the onset of the naturally occuring patina finish. The extra money invested upfront will pay off over the life of the gutter system.


If you find this article interesting, you may want to check out the whole series of posts on this English-cottage style home and all of the beautiful craftsmanship and materials that go into constructing it.
CLICK HERE

Article Tools
More articles like this here:

2 Comments

randy said:

Abby,
I spent many years climbing up a FULLY extended ladder 2-3 times/yr. that was anchored on the downslope of a hill. I had had enough! When we had a "reroof" and new gutters/gutter guards installed back in March 2004, I did some research and saw that they worked from many customer testimonials in different forums that I found (g**gle it), that's when it was a done deal for me. We had Hallett Gutter Covers ( http://www.hallettent.com/index.asp ) installed and they've worked great ever since. The only problem I've ever had is I do have to occasionally climb the ladder to remove some debris away from the valleys. While I don't have any personal experience with the brands you mention, I'm sure they work just fine, otherwise they wouldn't have been in business this long. Hope that helps.

Abby said:

Randy,

Not related to copper gutters - but what are your thoughts on gutterguard, gutter helmet, etc.? We're considering it for our home, because we don't want to climb that high to clean out the gutters, but I would think you could still get "clogs". Maybe not in the traditional places, but they would still require climbing a ladder.

Leave a comment


Photos

  • Notice the deep shadow lines that 3/4" lap siding creates.
  • More pre-primed cypress lap siding ready to be put to use.
  • This cypress lap siding is planed smooth for this Victorian application.
  • It's very important to fill all of the nail holes and caulk all gaps prior to painting.
  • You can see the raw edge of the siding from this angle.
  • A quarter dollar is 15/16" in diameter, used here for scale, to show the 3/4" thickness of the siding.
  • The is the three-car garage with the cypress clapboard painted in a classic white
  • Solid 3/4" cypress lap siding is used throughout the exterior of this Victorian Home
  • master bathroom suite
  • furniture sink vanity in bathroom
  • Palmdale entry with side lights and transom window
  • Palmdale foyer with alcove

Enter your email address: