Easy Steps for Replacing Damaged Bricks

Use the Correct Type of Mortar
 
You will also have to consider the mortar you must use to make the repair. There are five types of mortar commonly used in residential construction, considering that you will not be working on a load bearing structure Type N is often appropriate. You may have to add dye to the mortar as well to create as accurate a match as possible with the surrounding joints.


Replacement Bricks In Hand? Let's Get Started

When you have located the appropriate replacements for your damaged bricks, you can then start on the repair. Begin by chipping out the damaged brick as well as the surrounding mortar using a cold chisel and a ball peen hammer. This can be tricky and tedious work for the amateur, but it is important to work slowly to avoid accidentally damaging nearby bricks.
 

• After the bricks and mortar are removed, use a brush to remove any debris.
• Wet the area where the new mortar is to be applied thoroughly: this step will help your mortar cure properly.
• Once you have mixed a batch of mortar according to the manufacturer's instructions, use a trowel to butter the bottom of the hole where the damaged bricks once were.
• Then butter the top and sides of your first brick and set it into place.

Be sure to apply enough mortar so that the joint are the same thickness as the surrounding area. Keep in mind that some mortar protruding from the joint is natural and will be addressed in later steps.

• Working carefully yet quickly, continue laying bricks until the hole is filled.
• Check all of the mortar joints: if certain areas of the joints appear to be concave apply a bit more mortar.
• Next, shape the joints using your trowel or a jointer so it mimics the surrounding joints.
• Brush any excess mortar crumbles away from the face of the brick and joints.

Although replacing a few damaged bricks is a fine weekend project for many homeowners, keep in mind that larger projects probably merit calling a professional. This is also an essential step if you have any doubts about the structural stability of the area you wish to repair.